John Deere Quick Coupler Part Number LVB25976

John Deere iMatch Quick Hitch Category 1 with Adjustable Top Hook

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
 
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.

• All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

• Upper bushing
  • Inside diameter of 0.76 in. to 0.77 in. (19 mm to 20 mm)
  • Outside diameter of 1.24 in. to 1.25 in. (31 mm to 32 mm)
• Lower bushings
  • Inside diameter of 0.88 in. to 0.89 in. (22 mm to 23 mm)
  • Outside diameter of 1.43 in. to 1.44 in. (36 mm to 37 mm)

iMatch dimensions

 

 

Dimensions designated	Millimeters (minimum)	Millimeters (maximum)
'A' lower socket inside span	686.56	689.61
'B' lower socket width	27.94	29.46
'C' lower socket diameter	38.1	38.61
'D' upper hook vertical spacing	375.41	377.96

 

iMatch Quick-Hitch implement geometry

iMatch implement dimensions

 

 

Dimensions designated	Millimeters (minimum)	Millimeters (maximum)
'A' lower hitch pin or adapter outside diameter	36.33	36.58
'B' lower hitch pin inner shoulder spread	681.0	684.3
'C' lower hitch pin outer shoulder spread	750.83	753.88
'D' lower hitch pin inner/outer shoulder diameter	50.55	63.75
'E' coupler mast pin diameter	31.50	31.75
'F' coupler mast pin vertical spacing	379.48	382.53